Guess Zuboo's Hp on the dyno Sat morning. Prize for winner

For all RedlineGTi and general Suzuki related discussion
User avatar
Zuboo
Moderator
Posts: 3523
Joined: Mon Aug 25, 2003 12:00 am
Location: Brisbane
Location: Brisbane

I'm going on the dyno this sat morning 300 hp or bust again.

So lets play a game who guess the closest

Last time the clutch let go at 250hp and we were unsure why as its the same type of clutch i have been running up to 294hp for years. Clutch fixed last year but who knows i have been racing on the 250hp tune and new clutch for 8 months.

Its a G13B with a Garret GTX 2871, the exact same head as my yellow swift. Boost could go as high as 35psi we are going to push it as far as the engine sounds happy or another issue pops up.

For the winner i will give them a brand new set of INTIMA BRAKE PADS


Post where you think it may end up and i will video and post up on sat.


Image
A dyno will tell you anything you want, the 1/4 mile will tell you the truth!!!!
Image
[email protected] ST, 58.98 sprint [email protected], 61.6 Lakeside, 294HP ATW
User avatar
SOBIL
Posts: 793
Joined: Wed Nov 23, 2005 9:47 pm
Location: StAlbans Vic
Location: VVestside of MELB, AU

I'll take a guess at, 268.204418 hp....

I go double or nothing that you are impeded by a mechanical issue.


That aside i hope you hit your target!! GL HF DD
"It's not that i lost it, I just run out of room to save it."
User avatar
taylor delony
Posts: 238
Joined: Sat Feb 26, 2011 7:10 am
Location: Aldinga beach

287.4 hp atw
Mallala 11.4.15 1:22.35
User avatar
Puss-on-Boost
Posts: 2904
Joined: Sun Oct 03, 2004 4:04 pm
Location: Brisbane
Location: Newcastle

299.9hp :lol:
Last edited by Puss-on-Boost on Wed Apr 30, 2014 8:56 pm, edited 1 time in total.
Education is important, but race cars are importanter
User avatar
1600GTI
Posts: 1109
Joined: Thu Oct 01, 2009 4:42 pm
Location: BRISBANE

277
1600/1300 TWINCAM BALENO
with GSXR 1000 QUAD TB'S
User avatar
n0madic
Posts: 3213
Joined: Thu May 13, 2004 7:03 pm
Location: Brisbane
Location: Brisbane

287.4 with no fudging of IAT's and ramp rates ..
Dr Suzuki - Mobile Suzuki specialist mechanic
www.facebook.com/suzukimechanic for contact details or to like/share my page.
tjmgti
Posts: 230
Joined: Mon May 02, 2005 3:11 pm
Location: Brisbane
Location: Brisbane

307.1hp
User avatar
n0madic
Posts: 3213
Joined: Thu May 13, 2004 7:03 pm
Location: Brisbane
Location: Brisbane

better not be a bosch dyno he will make 380 hp !!
Dr Suzuki - Mobile Suzuki specialist mechanic
www.facebook.com/suzukimechanic for contact details or to like/share my page.
User avatar
Kb24
Posts: 303
Joined: Sat May 28, 2011 2:03 am
Location: 2148

330hp
User avatar
scotta1966
Posts: 99
Joined: Sat Nov 26, 2011 2:50 pm
Location: Brisbane

327hp
User avatar
drumer_z
Posts: 1056
Joined: Fri Jan 11, 2008 10:38 pm
Location: Noosa
Location: Noosa

292 hpatw
Work, Rest and GTi
User avatar
psigti01
Posts: 1297
Joined: Sun Sep 11, 2005 8:05 pm
Location: Bargo NSW
Location: townsville qld

290hp 8)
SRS Motorsports

Image
User avatar
Zuboo
Moderator
Posts: 3523
Joined: Mon Aug 25, 2003 12:00 am
Location: Brisbane
Location: Brisbane

n0madic wrote:287.4 with no fudging of IAT's and ramp rates ..
Low post

You know me always up front.

Runs will be in shoot out mode, your welcome too come and sit on your ass next to me watching just down the road from where you live.
A dyno will tell you anything you want, the 1/4 mile will tell you the truth!!!!
Image
[email protected] ST, 58.98 sprint [email protected], 61.6 Lakeside, 294HP ATW
User avatar
Zuboo
Moderator
Posts: 3523
Joined: Mon Aug 25, 2003 12:00 am
Location: Brisbane
Location: Brisbane

SOBIL wrote:I'll take a guess at, 268.204418 hp....

I go double or nothing that you are impeded by a mechanical issue.


That aside i hope you hit your target!! GL HF DD

Sad post but you might be right it's happened before.
A dyno will tell you anything you want, the 1/4 mile will tell you the truth!!!!
Image
[email protected] ST, 58.98 sprint [email protected], 61.6 Lakeside, 294HP ATW
User avatar
n0madic
Posts: 3213
Joined: Thu May 13, 2004 7:03 pm
Location: Brisbane
Location: Brisbane

Zuboo wrote:
n0madic wrote:287.4 with no fudging of IAT's and ramp rates ..
Low post

You know me always up front.

Runs will be in shoot out mode, your welcome too come and sit on your ass next to me watching just down the road from where you live.
you know where i live ?
Dr Suzuki - Mobile Suzuki specialist mechanic
www.facebook.com/suzukimechanic for contact details or to like/share my page.
User avatar
Zuboo
Moderator
Posts: 3523
Joined: Mon Aug 25, 2003 12:00 am
Location: Brisbane
Location: Brisbane

You don't see me looking in your window time to time.
A dyno will tell you anything you want, the 1/4 mile will tell you the truth!!!!
Image
[email protected] ST, 58.98 sprint [email protected], 61.6 Lakeside, 294HP ATW
User avatar
southy
Posts: 2065
Joined: Thu Jun 18, 2009 9:56 pm
Location: Cessnock

308hp
TEAM RIFF RAFF
Rasputin wrote: Yes. I like hard parking faggots and want to be one. It's my dream
Thanks,
Dan.
User avatar
SOBIL
Posts: 793
Joined: Wed Nov 23, 2005 9:47 pm
Location: StAlbans Vic
Location: VVestside of MELB, AU

Zuboo wrote:

Sad post but you might be right it's happened before.
I hope i doesn't!! just joking around.

can include mechanical failure of the dyno itself as a possibilty...... toooo much power = broken dyno?
Last edited by SOBIL on Thu May 01, 2014 9:03 am, edited 2 times in total.
"It's not that i lost it, I just run out of room to save it."
User avatar
elbola
Posts: 254
Joined: Tue Nov 13, 2012 11:26 am
Location: Curacao

305HP
User avatar
FlyingGrape
Posts: 2052
Joined: Wed Apr 28, 2004 3:03 am
Location: Canberra

what fuel are you using?
ImageET 13.138 at 120.2mph
instantshine
Posts: 92
Joined: Fri Feb 28, 2014 12:11 am
Location: Aruba

333hp
1996-GTi: JE 75mm 11:1 pistons,Ported head, Single UD pulley,Sandros chip,Aluminium flywheel,3tech 222/365 cams, Cultus headers,Cultus IM,50mm tb,Crane cams adjustable cam gears,Apex suspension, 4.39fd GB.
1991-GTi:
1989-GTi. Turbo.
2003-EVO7 GT-A
User avatar
pictureshowman
Posts: 1505
Joined: Fri Sep 03, 2010 10:41 am
Location: Bunya QLD 4055

311 fwhp and I don't want the intima brake pads, it would be different if it was something decent.
If "X" is an Unknown quantity, and a Spurt is a drip under pressure, then an "EXPERT" is an "Unknown Drip Under Pressure".
Why dont they just call it "Womenapause" instead.
User avatar
1600GTI
Posts: 1109
Joined: Thu Oct 01, 2009 4:42 pm
Location: BRISBANE

n0madic wrote:better not be a bosch dyno he will make 380 hp !!
Wow!!!
That was 5 years ago.....Hold onto things much??
Last edited by 1600GTI on Thu May 01, 2014 9:23 am, edited 1 time in total.
1600/1300 TWINCAM BALENO
with GSXR 1000 QUAD TB'S
User avatar
Puss-on-Boost
Posts: 2904
Joined: Sun Oct 03, 2004 4:04 pm
Location: Brisbane
Location: Newcastle

He's running e85
Education is important, but race cars are importanter
Tassie_mk1
Posts: 2096
Joined: Wed Feb 22, 2006 5:19 pm
Location: Outback Tassie
Location: Launceston, Tasmania

317hp, Hope it goes more!
Back in the game! Now building something mental... Will I ever finish? I hope so! When? No idea.
User avatar
Powered_by_Suzuki
Posts: 2267
Joined: Thu Jan 04, 2007 11:36 pm
Location: Red-Light near you
Location: Where-ever i wake up

291
User avatar
Zuboo
Moderator
Posts: 3523
Joined: Mon Aug 25, 2003 12:00 am
Location: Brisbane
Location: Brisbane

pictureshowman wrote:311 fwhp and I don't want the intima brake pads, it would be different if it was something decent.
Your welcome to put up any of your car parts as a prize as i have.
A dyno will tell you anything you want, the 1/4 mile will tell you the truth!!!!
Image
[email protected] ST, 58.98 sprint [email protected], 61.6 Lakeside, 294HP ATW
User avatar
Zuboo
Moderator
Posts: 3523
Joined: Mon Aug 25, 2003 12:00 am
Location: Brisbane
Location: Brisbane

1600GTI wrote:
n0madic wrote:better not be a bosch dyno he will make 380 hp !!
Wow!!!
That was 5 years ago.....Hold onto things much??
I think he was referring to the bosh dynos in England they are known to read high as all the guys over there have 400hp cars running high 13s
A dyno will tell you anything you want, the 1/4 mile will tell you the truth!!!!
Image
[email protected] ST, 58.98 sprint [email protected], 61.6 Lakeside, 294HP ATW
User avatar
1600GTI
Posts: 1109
Joined: Thu Oct 01, 2009 4:42 pm
Location: BRISBANE

Haha. I thought he was taking the piss out of me. :-)
1600/1300 TWINCAM BALENO
with GSXR 1000 QUAD TB'S
User avatar
-Harry-
Posts: 245
Joined: Thu Apr 12, 2007 7:07 pm
Location: Brisbane
Location: Brisbane

Zuboo wrote:
n0madic wrote:287.4 with no fudging of IAT's and ramp rates ..
Runs will be in shoot out mode, your welcome too come and sit on your ass next to me watching just down the road from where you live.
Making a few house calls lately aren't we?

330hp, and then a button for 250hp so you can put it to the ground.

with Dave at 317 im betting you will push till you surpass that at least.
With NA you get no turbo lag.......Wait, actually you have permanent turbo lag
Buzuki
Posts: 1578
Joined: Mon Nov 08, 2004 5:50 pm
Location: blacktown
Location: blacktown
Contact:

312
Image
User avatar
Pauly
Posts: 3975
Joined: Sat May 12, 2007 12:40 pm
Location: penriff
Location: penriff

319.4

Hopefully she holds together dan! Although, I do love carnage, and Rodney hasn't made many appearances around here lately :lol:
Insert sig here
buzza9
Posts: 1193
Joined: Sat Jun 14, 2008 3:55 pm
Location: Kurrajong

323hp
CONVO RACING
evilhighway
Posts: 111
Joined: Fri Jun 28, 2013 11:30 pm
Location: QLD

276.3hp
cappa-wpn
Posts: 808
Joined: Fri Oct 21, 2011 4:58 pm
Location: vic

Hmmm
Wish you all the best

Id be worried about the vitara piston/spool rods over 30psi

296 hp

If you get greedy and go higher I hope it holds up
User avatar
-Harry-
Posts: 245
Joined: Thu Apr 12, 2007 7:07 pm
Location: Brisbane
Location: Brisbane

cappa-wpn wrote:Hmmm
Id be worried about the vitara piston/spool rods over 30psi
vitara pistons hold over 600hp in civics. Shouldn't be an issue.

What are you planning on reving this One to btw? Playing it safe at 8500 or going for broke?
With NA you get no turbo lag.......Wait, actually you have permanent turbo lag
User avatar
Squirt
Posts: 951
Joined: Fri Dec 24, 2010 9:04 pm
Location: Central Coast NSW

315hp
CONVO RACING
NICOLEHUNTERS

Cynthia the Convo Racer
Rasputin wrote:I have a solid question.
User avatar
FlyingGrape
Posts: 2052
Joined: Wed Apr 28, 2004 3:03 am
Location: Canberra

340 fwhp. This thing should roar! Good luck Dan.
ImageET 13.138 at 120.2mph
User avatar
elbola
Posts: 254
Joined: Tue Nov 13, 2012 11:26 am
Location: Curacao

Don't forget to post a video!
User avatar
pictureshowman
Posts: 1505
Joined: Fri Sep 03, 2010 10:41 am
Location: Bunya QLD 4055

elbola wrote:Don't forget to post a video!
Good call.
If "X" is an Unknown quantity, and a Spurt is a drip under pressure, then an "EXPERT" is an "Unknown Drip Under Pressure".
Why dont they just call it "Womenapause" instead.
User avatar
StinkyWizzleteats
Posts: 2364
Joined: Tue Jan 31, 2006 2:27 pm
Location: Gold Coast
Location: Gold Coast

326hp. Good luck and hope all goes well.
User avatar
Swift RS
Posts: 158
Joined: Sun Jan 29, 2012 11:46 pm
Location: North Perth

322 Good Luck!
-----------------------------------------------------------------
Motorkhana Superkhana Swift RS
User avatar
racer5
Posts: 638
Joined: Thu Jul 07, 2005 4:59 pm
Location: Wollongong-NSW
Location: Wollongong, Australia

337hp atw

Great way to spend a Saturday, wanna swap? I'll be dropping off and picking up the gymnastics kid. :roll:

Ps. Keep the pads.
Retired the gti after 12000 track kms of fangin around.
Eastern creek 1.54.10, Wakefield 1.12.60 Bathurst 3.05
mnemonix
Posts: 81
Joined: Fri Jun 27, 2008 10:24 am
Location: Newcastle NSW

318hp.
Don't be tardy and get the video(s) up ASAP, we want to hear the bi**h scream!
LWB Sierra: 1.6 Twin-cam, Twin-charged, Twin-scroll, Twin-locked.
Pauter rods, ported head, 200/335i 210/340e cams, sr20tb, ID1000's, Adaptronic e420, Garrett GTX3076r, Ogura SC14, 2x Tial MV-s, Turbosmart Dualport.
ellpee
Posts: 378
Joined: Wed May 19, 2004 8:41 pm
Location: New Zealand
Location: New Zealand

302...
Understeer is when you hit the wall with the front of the car.
Oversteer is when you hit the wall with the rear of the car.
HP dictates how fast you hit the wall
And torque is how much you push the wall out of true.
User avatar
Dattman
Posts: 1768
Joined: Sat Feb 05, 2005 6:51 pm
Location: Chch - Quake Capital
Location: Christchurch, NZ

Well if it holds together and you get well over 30psi I'm expecting a big number, I'll say 308 atw
User avatar
Zuboo
Moderator
Posts: 3523
Joined: Mon Aug 25, 2003 12:00 am
Location: Brisbane
Location: Brisbane

276 hp on first 2 runs
A dyno will tell you anything you want, the 1/4 mile will tell you the truth!!!!
Image
[email protected] ST, 58.98 sprint [email protected], 61.6 Lakeside, 294HP ATW
User avatar
pictureshowman
Posts: 1505
Joined: Fri Sep 03, 2010 10:41 am
Location: Bunya QLD 4055

@ what PSI?
If "X" is an Unknown quantity, and a Spurt is a drip under pressure, then an "EXPERT" is an "Unknown Drip Under Pressure".
Why dont they just call it "Womenapause" instead.
User avatar
Zuboo
Moderator
Posts: 3523
Joined: Mon Aug 25, 2003 12:00 am
Location: Brisbane
Location: Brisbane

Its at 292 @ 25 psi at the moment just adding more timing. 24 % at the moment.
A dyno will tell you anything you want, the 1/4 mile will tell you the truth!!!!
Image
[email protected] ST, 58.98 sprint [email protected], 61.6 Lakeside, 294HP ATW
User avatar
Zuboo
Moderator
Posts: 3523
Joined: Mon Aug 25, 2003 12:00 am
Location: Brisbane
Location: Brisbane

307 hp
A dyno will tell you anything you want, the 1/4 mile will tell you the truth!!!!
Image
[email protected] ST, 58.98 sprint [email protected], 61.6 Lakeside, 294HP ATW
Post Reply