It is currently Sun Nov 01, 2020 4:26 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 322 posts ]  Go to page Previous  1 ... 13, 14, 15, 16, 17  Next
Author Message
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Thu Apr 16, 2020 9:22 am 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
thanks for that boosts sgt , when i found out about that extra mount , i decided to delete the suzitech engine steady .had to do mods to the bracket to fit it anyway.
if look closely you can see i used half of the suzitech steady on the mod bottom box mount , so i have a spare poly rubber.
with all 4 poly solid mounts now , i think im going to feel it.


Attachments:
IMG_1024 (2).JPG
IMG_1024 (2).JPG [ 420.15 KiB | Viewed 84 times ]
2016-07-08 10.59.36 (2).jpg
2016-07-08 10.59.36 (2).jpg [ 72.55 KiB | Viewed 1979 times ]


Last edited by gticon on Thu Apr 16, 2020 3:29 pm, edited 1 time in total.
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Thu Apr 16, 2020 9:41 am 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
fitted the drive shafts , coilovers and suzuki sport brakes :D


Attachments:
IMG_E1027.JPG
IMG_E1027.JPG [ 1.11 MiB | Viewed 97 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Fri May 01, 2020 10:45 am 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
fitted the 4 haltech high output coils with built -in ignitor to the suzitech shock tower brace .
also made a solid bracket up for the fuel pressure reg. and which bolts to the gearbox


Attachments:
IMG_1067 (2).JPG
IMG_1067 (2).JPG [ 702.72 KiB | Viewed 76 times ]
IMG_1066 (2).JPG
IMG_1066 (2).JPG [ 665.96 KiB | Viewed 76 times ]
IMG_1047 (2).JPG
IMG_1047 (2).JPG [ 663.07 KiB | Viewed 79 times ]
IMG_1051 (2).JPG
IMG_1051 (2).JPG [ 1.21 MiB | Viewed 76 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Fri May 22, 2020 6:16 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
finally on its wheels


Attachments:
IMG_1109 (5).JPG
IMG_1109 (5).JPG [ 1.36 MiB | Viewed 79 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Sat May 23, 2020 7:59 pm 
Offline
User avatar

Joined: Wed Feb 22, 2006 5:19 pm
Posts: 2104
Location: Outback Tassie
Love you build man great work :)

_________________
Back in the game! Now building something mental... Will I ever finish? I hope so! When? No idea.


Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Thu May 28, 2020 8:13 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
love you too ,thanks tassie, working on the intercooler piping at the moment ,then its back to wiring, shouldnt be to long now before it hits the dyno ,


Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Fri Aug 14, 2020 2:52 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
been a little distracted on the build no.3, but back on track for my end of year deadline. #-o
finish the turbo ss pipe work , took for ever ,one weld at a time ,too and throw to the mig welder. had to mark the position for each weld , as the welder told me, a spot weld would ruin his work.
as you see on the photos not much clearance.


Attachments:
IMG_0062 (2).JPG
IMG_0062 (2).JPG [ 1.33 MiB | Viewed 43 times ]
IMG_0054 (3).JPG
IMG_0054 (3).JPG [ 612.83 KiB | Viewed 42 times ]
IMG_0058 (2).JPG
IMG_0058 (2).JPG [ 972.98 KiB | Viewed 40 times ]
IMG_0059 (2).JPG
IMG_0059 (2).JPG [ 874.14 KiB | Viewed 43 times ]
IMG_0060_Moment (3).jpg
IMG_0060_Moment (3).jpg [ 140.34 KiB | Viewed 39 times ]
IMG_0056_Moment (2).jpg
IMG_0056_Moment (2).jpg [ 1.76 MiB | Viewed 42 times ]
IMG_0061 (2).JPG
IMG_0061 (2).JPG [ 684.57 KiB | Viewed 41 times ]
IMG_1161 (2).JPG
IMG_1161 (2).JPG [ 567.6 KiB | Viewed 43 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Tue Aug 25, 2020 1:55 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
replace the gti standard 50 amp with custom made brackets to suit the 110amp ford falcon BA alternator to handle the extra electronic components


Attachments:
IMG_0081 (2).JPG
IMG_0081 (2).JPG [ 681.4 KiB | Viewed 24 times ]
IMG_0083 (2).JPG
IMG_0083 (2).JPG [ 714.68 KiB | Viewed 24 times ]
IMG_0086 (2).JPG
IMG_0086 (2).JPG [ 819.97 KiB | Viewed 25 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Tue Aug 25, 2020 4:34 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
replaced the cable speedo drive for electronic speedo sensor from a SUZUKI ESTEEM 1.6L 1999-2001


Attachments:
IMG_0087 (2).JPG
IMG_0087 (2).JPG [ 333.63 KiB | Viewed 24 times ]
IMG_0089 (3).JPG
IMG_0089 (3).JPG [ 674.07 KiB | Viewed 25 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Tue Sep 01, 2020 2:57 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
the electronic boost controller got its own box. fitted


Attachments:
IMG_0097 (2).JPG
IMG_0097 (2).JPG [ 834.75 KiB | Viewed 12 times ]
IMG_0110 (2).JPG
IMG_0110 (2).JPG [ 1.14 MiB | Viewed 14 times ]
IMG_0108 (2).JPG
IMG_0108 (2).JPG [ 830.3 KiB | Viewed 13 times ]
IMG_0111 (2).JPG
IMG_0111 (2).JPG [ 990.29 KiB | Viewed 13 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Sat Sep 19, 2020 6:01 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
process is slow , because of long work hours but managed to wire up the coil packs and cut to length ignition leads


Attachments:
IMG_0138 (3).JPG
IMG_0138 (3).JPG [ 445.69 KiB | Viewed 12 times ]
IMG_0135 (2).JPG
IMG_0135 (2).JPG [ 764.12 KiB | Viewed 12 times ]
IMG_0134 (2).JPG
IMG_0134 (2).JPG [ 1.11 MiB | Viewed 12 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Fri Sep 25, 2020 1:49 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
ripped the dash out again ,feels like i am going backwards in this build #-o


Attachments:
IMG_0150 (4).JPG
IMG_0150 (4).JPG [ 1.08 MiB | Viewed 7 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Fri Sep 25, 2020 1:58 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
fitted the suzuki sport short shifter and cables with not to many dramas . cover the shifter hole with a alloy plate , and grind a bit plastic away to retain the original look.
and a new momo knob.


Attachments:
IMG_0146 (2).JPG
IMG_0146 (2).JPG [ 858.16 KiB | Viewed 7 times ]
IMG_0145 (2).JPG
IMG_0145 (2).JPG [ 1.29 MiB | Viewed 7 times ]
IMG_0147 (2).JPG
IMG_0147 (2).JPG [ 937.33 KiB | Viewed 7 times ]
IMG_0144 (2).JPG
IMG_0144 (2).JPG [ 1.04 MiB | Viewed 7 times ]
IMG_0143 (2)_LI.jpg
IMG_0143 (2)_LI.jpg [ 1.72 MiB | Viewed 7 times ]
IMG_0149 (2).JPG
IMG_0149 (2).JPG [ 977.88 KiB | Viewed 9 times ]
IMG_0151 (2).JPG
IMG_0151 (2).JPG [ 1.11 MiB | Viewed 10 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Mon Sep 28, 2020 12:24 pm 
Offline

Joined: Mon Aug 25, 2003 12:00 am
Posts: 1625
Location: Londoninium
As usual, detailed work. Well done. Much to go before my ride?

GTP


Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Mon Sep 28, 2020 4:36 pm 
Offline
User avatar

Joined: Fri Sep 03, 2010 10:41 am
Posts: 1501
Location: Bunya QLD 4055
gtpswift wrote:
As usual, detailed work. Well done. Much to go before my ride?

GTP

DRIVE?

_________________
If "X" is an Unknown quantity, and a Spurt is a drip under pressure, then an "EXPERT" is an "Unknown Drip Under Pressure".
Why dont they just call it "Womenapause" instead.


Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Thu Oct 01, 2020 7:04 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
thanks GTP , i have given it to the end of the year to finish . still have to fit electronic throttle pedal and rewire to suit the elite 1500 dbw . just fitted the 1600 clutch and brake pedal box and hydraulic master cylinder. bled and working :!:


Attachments:
IMG_0173 (2).JPG
IMG_0173 (2).JPG [ 636.88 KiB | Viewed 6 times ]
IMG_0167 (2).JPG
IMG_0167 (2).JPG [ 375.55 KiB | Viewed 6 times ]
IMG_0168 (2).JPG
IMG_0168 (2).JPG [ 580.96 KiB | Viewed 6 times ]
IMG_0169 (2).JPG
IMG_0169 (2).JPG [ 648.49 KiB | Viewed 7 times ]
IMG_0172 (2).JPG
IMG_0172 (2).JPG [ 871.19 KiB | Viewed 6 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Thu Oct 15, 2020 2:51 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
fitted the alfa romeo [bosch] electronic go pedal , used the existing original accelerator pedal and ecu mounts . started with one 3mm alloy plate and added two more as spaces top and bottom to give me the ideal height , position and rock solid mount of the pedal ,(trial and error)


Attachments:
IMG_0212 (3)_LI.jpg
IMG_0212 (3)_LI.jpg [ 2.15 MiB | Viewed 3 times ]
IMG_0204 (2).JPG
IMG_0204 (2).JPG [ 718.33 KiB | Viewed 3 times ]
IMG_0202 (2).JPG
IMG_0202 (2).JPG [ 1022.61 KiB | Viewed 3 times ]
IMG_0216 (2).JPG
IMG_0216 (2).JPG [ 1.09 MiB | Viewed 5 times ]
IMG_0215 (2).JPG
IMG_0215 (2).JPG [ 843.48 KiB | Viewed 4 times ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Mon Oct 19, 2020 6:04 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
fitted a cruise control switch meant for a steering column to the shift console


Attachments:
IMG_0225 (2).JPG
IMG_0225 (2).JPG [ 580.66 KiB | Not viewed yet ]
IMG_0229 (3).JPG
IMG_0229 (3).JPG [ 754.06 KiB | Not viewed yet ]
IMG_0231 (2).JPG
IMG_0231 (2).JPG [ 1.01 MiB | Not viewed yet ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Tue Oct 20, 2020 12:23 pm 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
i decided to put some led"s in next to the switch instead of wiring to the iq3 dash


Attachments:
IMG_0234 (2).JPG
IMG_0234 (2).JPG [ 260.84 KiB | Not viewed yet ]
Top
 Profile  
 
 Post subject: Re: suzuki swift cultus convertible build
PostPosted: Wed Oct 28, 2020 9:09 am 
Offline
User avatar

Joined: Thu Apr 28, 2016 12:23 am
Posts: 377
Location: adelaide
another set back #-o , because i changed to 1600 pedals , i had to make a new clutch and brake switch bracket ,


Attachments:
IMG_0244 (2).JPG
IMG_0244 (2).JPG [ 943.37 KiB | Not viewed yet ]
IMG_0245 (2).JPG
IMG_0245 (2).JPG [ 724.29 KiB | Not viewed yet ]
IMG_0246 (2).JPG
IMG_0246 (2).JPG [ 734.01 KiB | Not viewed yet ]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 322 posts ]  Go to page Previous  1 ... 13, 14, 15, 16, 17  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group