EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200

Suzuki parts for sale
Post Reply
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

FYI, Anyone who wanted ECU on "Outright" Purchase. let me know, as i might be able to source some local ECU's these are $50 on top of exchange prices. (As that will cover cost of the ECU)
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
zookman
Posts: 6
Joined: Mon Oct 06, 2014 1:12 pm
Location: Rockhampton

Im doing a full build on my car atm.
Looking to do the general vitara pistons and some forged rods. Have other just ran the chip with the block bored and lower compression without issues(yes its turbo)? And what about camshafts ? Or am i starting to poke into the haltech area?
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

With vitara pistons it will work. Cultus or stock cams are the go!
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

It's that time of the year again. Time to give back to the community!

Free Postage - Save $30 on exchange ECU's.
Free Postage on Outright ECU Purchases also - Save $15

Till 16th January, 2016
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
Tyler_846
Posts: 5
Joined: Mon Jan 18, 2016 8:46 pm
Location: Newcastle

Hey mate, just wondering if you were still installing/ selling chipped ecu's?
Cheers,
Tyler
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

PM Reply'ed

And yes still offering these
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
User avatar
stevegti2
Posts: 486
Joined: Mon Sep 10, 2007 7:40 am
Location: london
Location: uk/london
Contact:

still awaiting reply
http://www.uk-ssgti.com
N/A THE EXPENSIVE WAY TO GO SLOW
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

Have an Exchange Mk3 Unit here ready to go again
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
Quickee
Posts: 1
Joined: Mon Mar 14, 2016 1:32 pm
Location: WA

Hey there, I'm new to the forum so understandable if I get thrown at the back of the queue for my questions haha. I've hit a snag on my turbo vitara G16b, and you have been the guy recommended to come and see for ECU chipping. Is it possible for you to chip the vitara's for low boost applications? TIA
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

If this is a fully standard G16B, unfortunately i dont deal with this engine. If you were local i'd be we'd probally be able to get some cheap dyno time and have a play with the tune But it would be too risky for me to attempt a chip when your 2000km's away. :(

If you had a G13B Head on the engine we'd be able to get away with a turbo chip with the Apexi. but i'd say your probably battling some pinging now, so your best option would be standalone ecu
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
Slickswift96
Posts: 113
Joined: Tue May 12, 2015 6:18 pm
Location: Armidale

PM Sent
oscarmanalpha
Posts: 5
Joined: Wed Jun 16, 2010 7:19 am
Location: NSW

I'd like to thank Chris for the service he provides to this community.

I just recently got an exchange ECU and GRP A NA chip.

The cars general engine performance is very smooth now and those extra RPMs create a wonderful sound and extra power between 6-7500rpm.

My cars a daily driver 94 model, with extractors exhaust, K&N drop in filter MSD coil DMW LSD gearbox.

I might get a Cam and larger throttle bodies, right now I'm more than happy shes driving so well for her age.....
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

Great news!

FYI I have 2 Mk3 Units ready to go out on exchange basis if anyone wants some extra kick from there GTi
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

Have Mk3 Unit ready to go if anyone is considering
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

Mk2 ECU's are all out atm.
2x Mk3 ECU's chipped up ready to go out if anyone is interested
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

Quick update.

ECU's are back from exchange.

MK3's are ready. and be done with Turbo, GrpA Or Rospen maps.

Mk3 Exchange ECUs ;

Rospen Or GrpA i'm currently doing do $100 + Post
Turbo - $200 + Post

Express postage to you and back to me $32 (Aus Post have lifted costs)
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

Hi All.. The Crazy Christmas season is on it's way! As Usual. I normally run a small special on the Chipped Units to give back to the community.

This Year will be flat $10 Express Post to and From (Normally Postage is now $32)

$110 - Exchange NA (GrpA or Rospen Your choice)
$210 - Exchange Turbo

This includes a fully chipped EXCHANGE ECU to suit your vehicle which has been fitted with a socket and desired chip. The internals are also slightly re-worked to avoid future issues

All units are bench tested and road tested prior to sending.

Special will run from now upto 1/1/17
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
walter
Posts: 12
Joined: Mon Jun 18, 2012 8:41 pm
Location: Netherlands

You've got mail :D

Best regards,
Walter
jayelo66
Posts: 1
Joined: Sat Oct 28, 2017 3:50 pm
Location: queensland

Hi GTAYE.
are you still chipping the swift GTI ECU and if so can I get your postal address so I can send you my ECU and get it chipped for a turbo.

Thank you
Jaylo66.
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

jayelo66 wrote:Hi GTAYE.
are you still chipping the swift GTI ECU and if so can I get your postal address so I can send you my ECU and get it chipped for a turbo.

Thank you
Jaylo66.
Hey Mate

Im still chipping ecus if your keen!

Let me know

Chris

sorry about the delay, i havent had chance to get on here. But am back now

Chips and ECU's are always avaliable Lads!
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
samboy1123
Posts: 11
Joined: Wed Jul 22, 2015 12:13 pm
Location: Whyalla SA

Hi Gtaye,

Just sent you a PM, hoping you still have some chips left.

Cheers
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

PM Replied Bud.
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
User avatar
Sam7
Posts: 443
Joined: Tue Feb 23, 2016 5:38 am
Location: Cust NZ

PM sent.
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

PM replied
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
RedGTIracecar
Posts: 16
Joined: Sat Dec 23, 2017 9:08 pm
Location: sydney

Hi gtaye:

Whats the difference between the GrpA or Rospen N/A ECU.


What is the timing set at? factory ignition timing or advanced??


Although my race car has a chipped ecu, i would like to know which one you recommend.
imprezd
Posts: 103
Joined: Sun Oct 14, 2007 10:22 pm
Location: Perth W.A
Location: Perth W.A

Hey gtaye,

Just wondering if you are able to test/read a chip if it was sent to you..
Ive had a chip sitting in my shed for years as far as i know its never been fitted to anything..
only info i have is a hand written sticker on it saying turbo Gti

Cheers
DIZ111
Posts: 1
Joined: Mon Apr 22, 2019 8:21 pm
Location: Joyner QLD Australia

Pm sent.
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

DIZ111 wrote:Pm sent.
got it and replied :wink:
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
Dunmovin
Posts: 6
Joined: Sun May 05, 2019 10:08 pm
Location: New South Wales

Hi Gtaye, do you have any chips for Mk2 GTI Swift
Slygtii
Posts: 7
Joined: Wed Aug 14, 2019 12:13 pm
Location: Beverly Hills

Pm sent
Busty_wench
Posts: 32
Joined: Tue Mar 24, 2015 6:29 pm
Location: Brisbane

Hi all,

Do you know the specs needed for the turbo chip?
Eg, std injectors / fuel pump. T25/T25G Turbo, cooler plugs? Max 10psi. Etc.

Thanks heaps!
User avatar
gtaye
Posts: 7376
Joined: Mon Oct 18, 2004 8:54 pm
Location: Adelaide SA
Location: Adelaide, SA - Home of the NA lump!!

Pretty well documented stuff but yes pretty much as mentioned

When we tested a few cars back to back and fiddled with things, the cars were pretty happy at 10psi high boost, 7psi low boost, stock pump is fine (one did have a walbro 255 i believe), stock injectors, 1 step down in plugs, and a fuel reg for basic fuel control all had 2 had T25 turbo's and one was using a TD04

if you keep things around that spec, you shouldn't be having any issues
CJ Performance "Specialising in ECU Modification and Performance"

Offical 2006 RedlineGTi Paper, Scissors, Rock Champion!!
Busty_wench
Posts: 32
Joined: Tue Mar 24, 2015 6:29 pm
Location: Brisbane

Sweet. Thanks for the info. Can you please PM me your details and I'll grab one. If that's ok. Going overseas soon but will work it out with you. Thanks heaps.
Busty_wench
Posts: 32
Joined: Tue Mar 24, 2015 6:29 pm
Location: Brisbane

Thanks Chris. Excellent service and received quickly.
Dubbogti
Posts: 8
Joined: Sat May 04, 2013 9:28 pm
Location: Dubbo

Hey Doods are these exchange mk3 N/a chips still available?
Ferit
Posts: 5
Joined: Wed Dec 23, 2020 10:18 am
Location: Germany

helle there,

i drive a subaru justy 4x4 from 1996 with 68hp it´s nearly the same car like suzuki swift

the engine is already swaped into a g13b mk3 101hp with a N/A Chip but i dont know its maybe not the full metall camshafts :(

I want now do a turbo convention with round about 7psi boost but sure under 10 psi.
With a turbocharger of a Golf MK 4 GTI 1,8t 20v the model of the turbo is called K03s the wastegate is open at round about 6,5 psi.

But I dont know what type of ecu have its a mk2 or mk3 that i ve got to find out maybe you can give me a advice.

how can you adjust the setup with this parts ?can it have maybe objektions becaurce the car is not reachable for you or do you mean thats no problem.

can i use the stock nozzels with 7psi and how many fuel pressure i sould use?

The ecu is already with a socket can you sell me only the chip please becaurce im from Germany i think the shippingcost are very expensive and im very much afraid that my ecu can be lost.

Here in Germany are Swift GTI Parts really rare you know?

I hope we can get a good deal together please write me PM

best regards

Ferit sry for my bad english
Post Reply