Finished turbo problem

Suzuki Swift turbo discussion
Post Reply
User avatar
trial1505
Posts: 88
Joined: Sat Apr 21, 2012 10:22 am
Location: Greece

Hi!Just finished my turbo g13b samurai.It has a chipped mk3 ecu.I used a subaru tf035 turbo and a chargecooler.So...get started a couple of times idled fine.I Revved a bit.Hitted rev limiter two times wonderful..Reached working temperatures and fan worked like a charm for 20secs.It idled about 20 minutes and then...just died!I could not get it to start again.I got tested fuel delivery.spark ok!It cranks but no start.After a lot of times it started again like a charm.No misfires or anything wrong.Diagnostics are ok i get code 12 from ecu.Checked for air leaks.Oil pressures-Water temps are ok.
It is getting crazy.What else should i check before hitting the road?
User avatar
trial1505
Posts: 88
Joined: Sat Apr 21, 2012 10:22 am
Location: Greece

I replugged a lot of things like coil-ignitor-plug wires-omex rev limiter-maf-tps-distributor wires and i can tell problem solved for now.
Idled for 30 minutes-turned it off and on a couple of times without dying issues.Tested on road.It is spooling!See how it drives with a wideband for now.
Post Reply