It is currently Thu Apr 18, 2019 8:30 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: G13bb. Turbo build what Gearbox can hold the power?? AWD FWD
PostPosted: Fri Apr 05, 2019 4:13 am 
Offline

Joined: Thu Apr 04, 2019 7:05 am
Posts: 2
Location: Netherlands
im pretty new to suzuki
but the last years i'm having 2 suzuki Wagon R+ 1.3 16V SOHC
i want to build a sleeper that is the plan and just for a daily driver
it is just a very easy car .

my goal is in between 300 to 400Hp

i did some research and this should be possible
but i can not really find any info on the transmission diff and axle setup

and AWD would be cool
i now the Wagon R is alos build in a AWD version and all the FWD wagon R cars have the chassis
prepared for that so it is an easy install.

but what transmission setup would be the best to use and how far can i push it

if i go FWD what to i need to use or search for in a transmission code and for what car

if i go AWD what do i need to use and how far can i go in terms of power.

i found that the subaru justy from of '96 is sharing the G13B engine so the AWD system would fit
is this a strong base? and is it the same as the Wagon R AWD drivetrain

i hope you can help me with some info. if would be the perfect sleeper

Regards, Johan


Top
 Profile  
 
 Post subject: Re: G13bb. Turbo build what Gearbox can hold the power?? AWD FWD
PostPosted: Fri Apr 05, 2019 3:24 pm 
Offline
User avatar

Joined: Mon Oct 12, 2015 11:30 am
Posts: 396
Location: Napier
Hi and welcome!

All the information you need is on here, but I can see a few speed bumps in your plan and some more information is needed.

What engine are you planning on using?

300hp is close to the limit of what you can get out of a 1.3 with serious modifications. It has been done, there is a user on here that had one in his race car. Search for Zuboo.

The AWD box from the G16 "should" handle it providing there are no hard launches, but you might need to find something outside of the Suzuki family to handle that much power.

Do start a build thread if you decide to build this awesome sleeper!

_________________
A Kiwi learning to fly in a Mk1.


Top
 Profile  
 
 Post subject: Re: G13bb. Turbo build what Gearbox can hold the power?? AWD FWD
PostPosted: Fri Apr 05, 2019 8:54 pm 
Offline

Joined: Thu Apr 04, 2019 7:05 am
Posts: 2
Location: Netherlands
Howsie13 wrote:
Hi and welcome!

All the information you need is on here, but I can see a few speed bumps in your plan and some more information is needed.

What engine are you planning on using?

300hp is close to the limit of what you can get out of a 1.3 with serious modifications. It has been done, there is a user on here that had one in his race car. Search for Zuboo.

The AWD box from the G16 "should" handle it providing there are no hard launches, but you might need to find something outside of the Suzuki family to handle that much power.

Do start a build thread if you decide to build this awesome sleeper!


Oke

I want a plug and play solution for the drive train so
And that can hold the power . So if 275hp is the save limit of the drivetrain that Will the goal Then

My base Will be a Suzuki wagon R+. It is a G13BB engine that i want to use .

I now there was also a AWD drivetrain for the wagon R+ . Do all these AWD drivetrains the same g16 internals ?

Like the Subaru justy should be the same as the AWD system
Of the wagon R+?

The i Just need to search form a AWD system of the wagon R and have a upgrade clutch. The rest is the. Engine Tuning
I have a look for. " Zuboo"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group