Search found 7344 matches

by gtaye
Thu Sep 19, 2019 2:08 pm
Forum: Swift General Discussion
Topic: Any "Old School" members still around?
Replies: 52
Views: 13344

Re: Any "Old School" members still around?

Sill here also :) Currently moving parts form my orignal GTi over to another less rusted version :)
by gtaye
Thu Sep 19, 2019 2:02 pm
Forum: For Sale - Parts
Topic: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200
Replies: 435
Views: 231484

Re: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200

Pretty well documented stuff but yes pretty much as mentioned When we tested a few cars back to back and fiddled with things, the cars were pretty happy at 10psi high boost, 7psi low boost, stock pump is fine (one did have a walbro 255 i believe), stock injectors, 1 step down in plugs, and a fuel re...
by gtaye
Mon May 06, 2019 11:41 am
Forum: For Sale - Parts
Topic: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200
Replies: 435
Views: 231484

Re: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200

DIZ111 wrote:Pm sent.
got it and replied :wink:
by gtaye
Wed Oct 24, 2018 10:44 am
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

That is correct, No chip for these being 2003, it would be OBD2, so you would probably be able to interface with the ECU and reprogram without chipping as such. Still not something i do without the car with me as i'm no internet tuner
by gtaye
Mon Jul 30, 2018 11:22 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

Ladies and gentlemen... im throwing these out at 50 inc post till end of august. send me your ecu and have it installed (Socket and chip) for $90 + return post cost
by gtaye
Mon May 14, 2018 11:19 am
Forum: Swift Technical
Topic: GTi MK3 Timing Belt Replacement
Replies: 10
Views: 5856

Re: GTi MK3 Timing Belt Replacement

Can confirm... bin the spring! Cost me a set of intake valves and about 2k worth of top end rebuild
by gtaye
Mon May 14, 2018 11:01 am
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

George I'll send you a message

Chris
by gtaye
Sat Dec 02, 2017 8:55 am
Forum: For Sale - Parts
Topic: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200
Replies: 435
Views: 231484

Re: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200

Hi GTAYE. are you still chipping the swift GTI ECU and if so can I get your postal address so I can send you my ECU and get it chipped for a turbo. Thank you Jaylo66. Hey Mate Im still chipping ecus if your keen! Let me know Chris sorry about the delay, i havent had chance to get on here. But am ba...
by gtaye
Thu Sep 28, 2017 1:58 pm
Forum: Swift Technical
Topic: ECU chip or standalone on a 1300 NA high compression
Replies: 78
Views: 43880

Re: ECU chip or standalone on a 1300 NA high compression

I wouldn't worry about those marks. I see them pretty commonly on the ECU's these days that have been left "open" for a while. the PCB's are also coated in a protective coating that stops the tracks having issues Should work fine. GrpA Will have a 8600 RPM limiter, mroe advanced timing map...
by gtaye
Thu Aug 31, 2017 10:06 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

All Taken care of RoofrackGTi

PM sent + Chip is packed and ready to go!
by gtaye
Fri Jul 28, 2017 1:28 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

FYI Have limited numbers of Mk3 left, Mk2's are all sold out
by gtaye
Sun Jul 09, 2017 7:57 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

mortit wrote:Do you have any Mk3 chips left?
I do have some left.. PM Sent
by gtaye
Fri Jun 23, 2017 3:40 pm
Forum: Swift Technical
Topic: 3 angle valves
Replies: 4
Views: 3393

Re: 3 angle valves

Not as standard no they dont. As for gains i'm sure someone more knowledgeable can answer this
by gtaye
Fri Jun 23, 2017 3:38 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

All Sorted with GTluver
by gtaye
Tue Apr 18, 2017 4:13 pm
Forum: Swift Technical - Turbo Specific
Topic: Max boost on 91 octane gas ?
Replies: 4
Views: 3642

Re: Max boost on 91 octane gas ?

10 PSI tops. as thats almost on the limits of the sensors.. 8Psi to keep things safe.
by gtaye
Tue Apr 18, 2017 4:03 pm
Forum: General Suzuki Discussion
Topic: Haltech e6x base map
Replies: 1
Views: 1683

Re: Haltech e6x base map

You would be best to speak with a qualified tuner or Haltech themselves for a base map. The Base map will relate to trigger type, Ignition firing type, Standard Dizzy firing or individual coils. While it's possibly to write a quick map up.. i'd really not want to offer anyone a base map without bein...
by gtaye
Tue Mar 14, 2017 7:20 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

Have 1x Mk3 on exchange here ready to go if anyone needs
by gtaye
Sun Feb 26, 2017 4:54 pm
Forum: Recommendations
Topic: Machinist needed
Replies: 2
Views: 2707

Re: Machinist needed

Give this guy a Call

http://redlinegti.com/forum/viewtopic.php?f=4&t=54780

He's worked and built many Suzuki Engines. and should be able to steer you in the correct direction!
by gtaye
Thu Feb 23, 2017 7:19 pm
Forum: Wanted To Buy - Parts
Topic: WTB: mk3 ecu
Replies: 7
Views: 3732

Re: WTB: mk3 ecu

Banno wrote:Will a Mk3 fit a Mk2? I have a Mk2 and the ecu fried :/
Yes both are completely interchangeable without issues..
by gtaye
Fri Jan 13, 2017 10:57 am
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

Have about 4-5 of the Mk3 ones left.
by gtaye
Thu Dec 29, 2016 9:49 am
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

Have sent you a PM with options
by gtaye
Wed Dec 14, 2016 8:01 am
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

PM Sent
by gtaye
Wed Nov 16, 2016 12:11 pm
Forum: Wanted To Buy - Parts
Topic: (FOUND)WTB: Aircon Idle up Solenoid Mk2/3 GTi
Replies: 0
Views: 868

(FOUND)WTB: Aircon Idle up Solenoid Mk2/3 GTi

Item Description:

Chasing the Idle up solenoid that mounts to the firewall

Price Range:

$30?

Contact Details:

PM or Reply here
by gtaye
Wed Nov 16, 2016 8:15 am
Forum: For Sale - Parts
Topic: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200
Replies: 435
Views: 231484

Re: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200

Hi All.. The Crazy Christmas season is on it's way! As Usual. I normally run a small special on the Chipped Units to give back to the community. This Year will be flat $10 Express Post to and From (Normally Postage is now $32) $110 - Exchange NA (GrpA or Rospen Your choice) $210 - Exchange Turbo Thi...
by gtaye
Thu Nov 10, 2016 7:09 am
Forum: Swift Technical
Topic: Extremely rough idle when warm
Replies: 6
Views: 4395

Re: Extremely rough idle when warm

Have you checked for error codes? Disconnecting the Maf and it running right may only be shortly solving the issue as richens the mixture heavily with MAF Disconnected.. You could be even suffering from a vacuum leak?
by gtaye
Thu Nov 10, 2016 7:06 am
Forum: In The Build
Topic: suzuki swift cultus convertible build
Replies: 348
Views: 133929

Re: suzuki swift cultus convertible build

This build has come so far. It's impressive! Your doing some amazing things! Keep it up!
by gtaye
Mon Nov 07, 2016 10:01 am
Forum: For Sale - Parts
Topic: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200
Replies: 435
Views: 231484

Re: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200

Quick update.

ECU's are back from exchange.

MK3's are ready. and be done with Turbo, GrpA Or Rospen maps.

Mk3 Exchange ECUs ;

Rospen Or GrpA i'm currently doing do $100 + Post
Turbo - $200 + Post

Express postage to you and back to me $32 (Aus Post have lifted costs)
by gtaye
Wed Nov 02, 2016 1:23 pm
Forum: Off Topic Discussion
Topic: Pick my next Car
Replies: 27
Views: 25537

Re: Pick my next Car

Have a Sus at the Ford Focus XR5 (Mondeo XR5 is nice too with it's adaptive Cruise etc control no auto option either :D ), I've got one of these from 2012, currently throwing 205kw ATW out of it and only chucked 3,500 into it from stock.. Has not had any issues, they run the Volvo T5 5 Pot engine fr...
by gtaye
Tue Oct 25, 2016 10:41 pm
Forum: In The Build
Topic: suzuki swift cultus convertible build
Replies: 348
Views: 133929

Re: suzuki swift cultus convertible build

Spot on.. I basicly always advise running the MAF in the factory location on the pressured section.. as the MAF Readings spike in air flow trigger the timing to start retarding and the fuel injectors to pump more fuel
by gtaye
Mon Oct 10, 2016 8:21 pm
Forum: Swift Technical
Topic: REAR BUMP STOPS
Replies: 4
Views: 2642

Re: REAR BUMP STOPS

If you have none.. head down to your local Peddars or any suspension place and they can get you a new set pretty quick
by gtaye
Fri Sep 30, 2016 9:43 am
Forum: Wanted To Buy - Parts
Topic: WTB: group a ECU tuning
Replies: 3
Views: 1657

Re: WTB: group a ECU tuning

Have shot you PM
by gtaye
Tue Sep 13, 2016 4:33 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

EEPROMS Are not re-writable etc They are set maps.
by gtaye
Mon Sep 12, 2016 8:24 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

have a handful of these left now. If anyone was considering these, DMW Dave used one on a recent build and netted just over 100HP ATW With exhaust, Stock cams and SR20 TB conversion (Along with the usual boltons) These chips seem to not mind the "Mild" applications after all aslong as you ...
by gtaye
Mon Sep 12, 2016 8:22 pm
Forum: For Sale - Parts
Topic: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200
Replies: 435
Views: 231484

Re: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200

Mk2 ECU's are all out atm.
2x Mk3 ECU's chipped up ready to go out if anyone is interested
by gtaye
Mon Aug 22, 2016 11:31 am
Forum: Swift Technical
Topic: Swift GTi Mk2 chugging problem
Replies: 11
Views: 5187

Re: Swift GTi Mk2 chugging problem

I'd check fuel pressure, possibly pump. but also check basics like leads, coil etc.. even timing.
by gtaye
Fri Aug 19, 2016 10:05 am
Forum: For Sale - Parts
Topic: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200
Replies: 435
Views: 231484

Re: EOI: Exchange ECU Chipping Service NA = $100 - Turbo = $200

Have Mk3 Unit ready to go if anyone is considering
by gtaye
Fri Aug 19, 2016 9:53 am
Forum: Wanted To Buy - Parts
Topic: WTB: Rear Camber Arms OR Camber Strut tops
Replies: 3
Views: 2312

Re: WTB: Rear Camber Arms OR Camber Strut tops

Am considering this option but they are fixed i believe. If nothing pops up i'll bite the bullet and get a set. but keen to see if anyone has anything kicking around first
by gtaye
Thu Aug 18, 2016 9:53 pm
Forum: Wanted To Buy - Parts
Topic: WTB: Rear Camber Arms OR Camber Strut tops
Replies: 3
Views: 2312

WTB: Rear Camber Arms OR Camber Strut tops

Item Description:
Looking for a set of functional rear strut tops to add some camber or rear camber arms to suit Swift GTi mk3 1994

Price Range:
You tell me

Contact Details:

Pm or reply here
by gtaye
Tue Aug 09, 2016 7:25 pm
Forum: In The Build
Topic: suzuki swift cultus convertible build
Replies: 348
Views: 133929

Re: suzuki swift cultus convertible build

Really Enjoying this build!!!!

Keep up the great work!!

Hope to see it out one day around town!
by gtaye
Tue Aug 02, 2016 8:26 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

Just abit of an FYI, DMW Dave used this chip on the old TOY12S, Dynoing in at 105BHP @ 7500. With basic bolt ons (Stock cams, Exhaust and sr20TB) This has got me curious. To much that i'm right now swapping my GrpA Chip to one of these Rospen
by gtaye
Mon Aug 01, 2016 10:24 pm
Forum: Wanted To Buy - Parts
Topic: WTB: mk3 GTi sticker set
Replies: 2
Views: 1576

Re: WTB: mk3 GTi sticker set

+1 Buy them from swift RS
by gtaye
Mon Aug 01, 2016 10:23 pm
Forum: For Sale - Parts
Topic: FS: Redline Gti stickers
Replies: 32
Views: 20166

Re: FS: Redline Gti stickers

Swift RS Is an absolute GOD!

Got my sticker set today and just cant be any more happy with it! Not only did he go above and beyond my expectations, but the stickers are just amazing!

Great work! We need more people like this!
by gtaye
Sun Jul 31, 2016 5:56 pm
Forum: General Suzuki Discussion
Topic: 1994 Suzuki Swift GTI evaluation?
Replies: 2
Views: 1933

Re: 1994 Suzuki Swift GTI evaluation?

Chuck some pictures of it up and we'll go from there. i'm currently fixing up a Mk3 1994 Myself.
by gtaye
Sun Jul 31, 2016 5:52 pm
Forum: In The Build
Topic: suzuki swift cultus convertible build
Replies: 348
Views: 133929

Re: suzuki swift cultus convertible build

For Turbo your best with high lift and close to stock duration i believe is what i've heard, where Big NA Cams tend to come with more duration, overlap and lift. What type of engine management will you be running if you go turbo? If you get a good ECU behind it, and have the cams dialed in you might...
by gtaye
Sun Jul 31, 2016 5:21 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

Mk2 Chips are now sold out.
by gtaye
Sun Jul 31, 2016 4:19 pm
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

PM Sent - adriantillin

As for the Ignis, these chips will not work as the ECU and engine are completely different. Sorry.
by gtaye
Thu Jul 28, 2016 7:18 am
Forum: For Sale - Parts
Topic: FS: BD Motorsports/Rospen Chips Mk2/3
Replies: 47
Views: 30270

Re: FS: BD Motorsports/Rospen Chips Mk2/3

PM Replied :wink: :wink:
by gtaye
Tue Jul 26, 2016 10:49 pm
Forum: For Sale - Parts
Topic: (SOLD) FS: K-Mac Lowered Springs MK2/3
Replies: 4
Views: 2957

Re: FS: K-Mac Lowered Springs MK2/3

SOLD!