Search found 132 matches

by ddamddimddem
Mon Feb 16, 2015 4:39 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

I have assamble the gearbox. The ratio worked out fine.

So i use ignis sport 3.944 final drive
And zc21s fifth gear.

Before installing the gearbox, looking for clutch.
by ddamddimddem
Fri Jan 09, 2015 8:39 pm
Forum: New Swift Technical
Topic: How To Install ZC31S Gearbox into ZC21S
Replies: 27
Views: 23066

Re: How To Install ZC31S Gearbox into ZC21S

Hi guys, can anyone tell me if the gearbox internals from a ZC31 box will fit into a ZC21 box? I can get a ZC31 box for dirt cheap, but a casing has a whole in it, so I just want to know if I can swap internals from the ZC31 box into my ZC21 box? Also, the same guy has a ZC31 intake manifold, other...
by ddamddimddem
Thu Jan 08, 2015 8:58 pm
Forum: In The Build
Topic: 381 WHP Suzuki Swift ZC21S Turbo 1600cc
Replies: 51
Views: 36775

Re: 381 WHP Suzuki Swift ZC21S Turbo 1600cc

Much have change, blown my type1 gearbox, but going to built another soon..

But before any update, enjoy this low resolution sequentialshift vid.

http://youtu.be/npiDZKJFQLM
by ddamddimddem
Thu Jan 08, 2015 6:01 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

Hey guys, just wanna share stock type 2 gearbox with sequentialshifter

http://youtu.be/npiDZKJFQLM

Sorry on the low resolution
by ddamddimddem
Tue Jan 06, 2015 9:22 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

Yes you can swap fifth gear without modding. Yes you can fit the 4.1 cwp from m15 gearbox or you can fit the 3.9 from liana m18 gearbox When you change the crown wheel and pinion that is all you need to change.You can even fit the 3.5 cwp from a swift sedan 1600,but you would then need to fit the o...
by ddamddimddem
Tue Jan 06, 2015 9:13 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

the ignis sports in Australia has 0.885 5th gear and a 3.944 final gear ratio. I do remember reading someone swapped 5th from swift into ignis box but cannot remember were I saw it and what model swift it was from. Have you tired Suzuki and look at part number for final drive in ignis HT81S and the...
by ddamddimddem
Mon Jan 05, 2015 1:35 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

I have confirmed the ignis parts needed for the 3.944 final gear i want, just needed a hint from anyone if i can just use zc21 5th gear instead of ordering RRP
by ddamddimddem
Sun Jan 04, 2015 9:21 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

By changing the 5th gear into 0.769 ratio.. The 5th gear will be dropped into 5421 rpm.. Still around my torque peak power though.. So i think its still a good mod.. What do u guys think?
by ddamddimddem
Sun Jan 04, 2015 9:10 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

As you can see the 4th reach 193kph upon reaching 7500rpm, so when shifted to 5th at that speed, the rpm will drop to 6238 rpm
by ddamddimddem
Sun Jan 04, 2015 9:04 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

With stock type 1 sport gearbox ratio at 7500 rpm
by ddamddimddem
Sun Jan 04, 2015 8:57 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

Here's my boost graphic, but for daily just 1.1 bar, so its around 4500 rpm to full boost, the dyno on 4th gear. Goint to post the number simulation soon..

Also post the stock sport ratio graph
by ddamddimddem
Sun Jan 04, 2015 3:14 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

Bzchi listed this on my close ratio thread many years ago. Ignis Sport M15A (5MT) (1) 3.545 (2) 1.904 (3) 1.407 (4) 1.064 (5) 0.885 Final: 3.944 New Swift M15A (5MT) (1) 3.545 (2) 1.904 (3) 1.310 (4) 0.969 (5) 0.769 Final: 4.105 So basically you want an Ignis box with a standard swift 5th gear, I c...
by ddamddimddem
Sun Jan 04, 2015 2:52 pm
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

Who told you ignis sport gearbox has 3.9?? I have an ignis sport gearbox it's got roughly 4.1 ratio Like yldboy said You will fall out or your power band I had this problem years ago Because I ran a bit turbo Everytime I shifted I fell out of the boost range and had to come on boost again every gea...
by ddamddimddem
Sun Jan 04, 2015 11:19 am
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

Re: High speed gearbox built need help

Well since i have used both of swift sportgearbox type 1(finaldrive 4.235) and type 2(finadrive 4.388). I still want the 3.944 ignis sport final drive though.
Maybe just by changing the 5th gear ratio is enough, but just curious of the ignis final gear.

Thanx for the input, man!
by ddamddimddem
Sun Jan 04, 2015 2:38 am
Forum: New Swift Technical
Topic: High speed gearbox built need help
Replies: 19
Views: 12665

High speed gearbox built need help

Hi guys, i know this forum havent had much activity for the past few months, but hopefully someone had time to read this and give some ideas. I'm trying to build a high speed gearbox for swift sport from a type 1 swiftsport gearbox which have ratio as follows Gear. Ratio 1. 3.545 2. 1.904 3. 1.407 4...
by ddamddimddem
Mon Jun 23, 2014 7:25 pm
Forum: New Swift Technical
Topic: going to boost it up to 10psi
Replies: 3
Views: 2767

Re: going to boost it up to 10psi

victorgarage wrote:im going to try to get the max of my 300cc injectors comes with zage turbo kit
and emanage gold for engine management

please advice me if onyone ever done before
how high i could expect from the 300cc injectors
Wah bos victor ketemunya disini hwhwhw
by ddamddimddem
Mon Jun 23, 2014 7:23 pm
Forum: New Swift Technical
Topic: Bearing done and dusted ... Suggestions ??
Replies: 11
Views: 6069

Re: Bearing done and dusted ... Suggestions ??

southy wrote:did you plasti gauge bearings on assembly?
It was the same question i ask him
by ddamddimddem
Thu Apr 10, 2014 9:58 pm
Forum: New Swift Technical
Topic: How To Install ZC31S Gearbox into ZC21S
Replies: 27
Views: 23066

Re: How To Install ZC31S Gearbox into ZC21S

I'd love to have ignis final
by ddamddimddem
Thu Jan 30, 2014 12:17 pm
Forum: Wanted To Buy - Parts
Topic: WTB: M18 Engine
Replies: 27
Views: 4462

Re: WTB: M18 Engine

I miss this thread. Sure i guess big power small engine is always hard to maintain it in a reliable state. I pick the m16a engine bcause m18a sleeve too thin. Cut story short, i disassamble my 381whp m16a engine bcause some sound heard a few months after the drag race. For the record, the engine was...
by ddamddimddem
Thu Jan 30, 2014 11:57 am
Forum: New Swift Technical
Topic: Gap clearance talk for the m series engine
Replies: 4
Views: 3528

Re: Gap clearance talk for the m series engine

if you do go .06mm it will be a pretty safe bet . when talking engine bearing clearances , i normally talk in thousandths of an inch not 100ths of a mm because im old . generally in a std engine , minimum bearing clearance would be .0008" (.02mm) , for a high revving high performance boosted e...
by ddamddimddem
Thu Jan 30, 2014 11:47 am
Forum: New Swift Technical
Topic: Gap clearance talk for the m series engine
Replies: 4
Views: 3528

Re: Gap clearance talk for the m series engine

You kinda threw me off with use of term "gap" Thats only used when refering to piston rings and sparkplug tips. The word you need is bearing crush (amount of clearance due to distortion of bearings under tension) you will need to reference a factory workshop manual for those specification...
by ddamddimddem
Mon Nov 25, 2013 11:54 am
Forum: New Swift Technical
Topic: Gap clearance talk for the m series engine
Replies: 4
Views: 3528

Gap clearance talk for the m series engine

Hello, i'm ivan I started this thread to discuss about the gap clearance Right now we've disassamble the boosted m16a engine. Because we want to refresh the engine, and due to some unusual "srrrrrr" sound, while off throttle in the decreasing rpm. Cut story short, we open it. We found a cr...
by ddamddimddem
Sun Nov 03, 2013 2:52 pm
Forum: New Swift Technical
Topic: m15a m16a m18a performance upgrade and info
Replies: 23
Views: 19687

Re: m15a m16a m18a performance upgrade and info

Twin clutch for suzuki swift sport.. Includes flywheel..
Motul300v competition
Fk gear lsd oil
by ddamddimddem
Tue Sep 17, 2013 1:39 am
Forum: New Swift Technical
Topic: Rumble in the back - and not the fun kind....
Replies: 7
Views: 3838

Re: Rumble in the back - and not the fun kind....

In some indonesian model usually the noise came from the back door..
by ddamddimddem
Sun Sep 01, 2013 10:31 pm
Forum: In The Build
Topic: ZC21S 2009 Swift
Replies: 19
Views: 12732

Re: ZC21S 2009 Swift

Yes u need to make a custom adaptor for the m15a TB to be installed with the sport manifold.. Well the best mod is to buy mod parts that can still be used with the m16a swap later like piggyback and headers.. Why would you want to bolt an m15 throttle body onto the m16 manifold.. Be smart and go do...
by ddamddimddem
Sun Sep 01, 2013 3:31 pm
Forum: In The Build
Topic: ZC21S 2009 Swift
Replies: 19
Views: 12732

Re: ZC21S 2009 Swift

Yes u need to make a custom adaptor for the m15a TB to be installed with the sport manifold..
Well the best mod is to buy mod parts that can still be used with the m16a swap later like piggyback and headers..
by ddamddimddem
Sun Sep 01, 2013 11:48 am
Forum: In The Build
Topic: ZC21S 2009 Swift
Replies: 19
Views: 12732

Re: ZC21S 2009 Swift

Hi bro! Nice swift.. White zc always looks nice to me.. For performance upgrade, It depends on the budget u're willing to spend, then make the best of it.. U can use m16a lianA block.. U can put m16a internal into m15a to increase displacement Not much optional parts for the m15a gearbox.. Thats wh...
by ddamddimddem
Sat Aug 31, 2013 1:39 am
Forum: In The Build
Topic: ONX77 - 07 Swift
Replies: 8
Views: 4391

Re: ONX77 - 07 Swift

Cant believe i missed this thread..

Yes about that monster engine, i believe dave have commented on the engine, stating that the awd system they're using possibly from subaru or evo..

By the way nice intake manifold design u have there onx77.. Has it come into realization?
by ddamddimddem
Sat Aug 31, 2013 1:26 am
Forum: In The Build
Topic: ZC21S 2009 Swift
Replies: 19
Views: 12732

Re: ZC21S 2009 Swift

Hi bro! Nice swift.. White zc always looks nice to me.. For performance upgrade, It depends on the budget u're willing to spend, then make the best of it.. U can use m16a lianA block.. U can put m16a internal into m15a to increase displacement Not much optional parts for the m15a gearbox.. Thats why...
by ddamddimddem
Sat Jul 20, 2013 2:03 am
Forum: In The Build
Topic: 381 WHP Suzuki Swift ZC21S Turbo 1600cc
Replies: 51
Views: 36775

Re: 381 WHP Suzuki Swift ZC21S Turbo 1600cc

Made by my friend
by ddamddimddem
Fri Jul 19, 2013 5:22 pm
Forum: New Swift Technical
Topic: m15a m16a m18a performance upgrade and info
Replies: 23
Views: 19687

Re: m15a m16a m18a performance upgrade and info

Wah its good for M15a.. Just noticed its for m15a.. Good info for zc21s fellow
by ddamddimddem
Tue Jul 16, 2013 7:04 pm
Forum: New Swift Technical
Topic: m15a and m16a conrod interchangeable?for Turbo on m15a.
Replies: 5
Views: 5272

Re: m15a and m16a conrod interchangeable?for Turbo on m15a.

The conrod looked good.. But i dunno how to check a conrod.. Maybe u can give them email, asking whats the hp rating..

I'd use the freebies if it were me hehe..
But check for compression ratio, i'm curious.. Supposedly will stay the same since they're the same height
by ddamddimddem
Mon Jul 15, 2013 11:31 pm
Forum: New Swift Technical
Topic: Emanage Ultimate install for M15A
Replies: 12
Views: 8048

Re: Emanage Ultimate install for M15A

Its not that hard wiring emanage ultimate.. U only need workshop manual.. There's the ecu pin out.. From there just follow the emanage installation manual.. It shows ignition timing and all if u wire it correctly.. U can input vehicle speed sensor.. If u decide to do this, pick the wire going from e...
by ddamddimddem
Mon Jul 15, 2013 11:26 pm
Forum: New Swift Technical
Topic: m15a and m16a conrod interchangeable?for Turbo on m15a.
Replies: 5
Views: 5272

Re: m15a and m16a conrod interchangeable?for Turbo on m15a.

Interchangeable but u'll be loosing a bit of rod ratio, on the plus side it will lower your comp ratio, on the down side, m15a already low comped, cutting 2mm, will lower it too much imho.. Since its 1500cc, it might be terrible when off boost.. I believe there's forged rod for m15a.. U can use spor...
by ddamddimddem
Mon Jul 15, 2013 8:36 am
Forum: New Swift Technical
Topic: M16A Type 1 and Type gearbox
Replies: 26
Views: 14532

Re: M16A Type 1 and Type gearbox

34wrc, what item did u buy from mfactory?
by ddamddimddem
Mon Jul 15, 2013 8:35 am
Forum: New Swift Technical
Topic: Emanage Ultimate install for M15A
Replies: 12
Views: 8048

Re: Emanage Ultimate install for M15A

Onx77 do u have fmanage manual in english? Couldnt find one.. Only in japanese..
by ddamddimddem
Thu Jul 11, 2013 4:23 pm
Forum: New Swift Technical
Topic: ASK: Individual coil mod for zc31s or zc21s
Replies: 0
Views: 1298

ASK: Individual coil mod for zc31s or zc21s

Hi there guys Wanna ask if any one know how to mod the coils of zc31s or zc21s from 2 coil into indivdual coil for each cylinder.. I've seen top fuel swift do this to their swift, but they only mention it as honda's coil.. Also can this be done with emanage ultimate? I'm guessing it can as i remembe...
by ddamddimddem
Wed Jul 10, 2013 11:42 pm
Forum: New Swift Technical
Topic: 2011-2013 new swift workshop manual required
Replies: 5
Views: 3417

Re: 2011-2013 new swift workshop manual required

I'm also in need of these, a friend of mine decide to charge his zc32s.. Have u found it dave?
by ddamddimddem
Mon Jul 08, 2013 6:28 pm
Forum: In The Build
Topic: 381 WHP Suzuki Swift ZC21S Turbo 1600cc
Replies: 51
Views: 36775

Re: 381 WHP Suzuki Swift ZC21S Turbo 1600cc

here's the video i've promised a few weeks back.. having watch my drag launches too many times, i realize i'm a lousy dragster hahaha.. well still learning to control this swift.. after all it's my first 380whp ride.. [video=youtube_share;BVLsR9T-AdE]http://youtu.be/BVLsR9T-AdE[/video] http://youtu....
by ddamddimddem
Mon Jul 08, 2013 1:25 am
Forum: New Swift Technical
Topic: M16A Type 1 and Type gearbox
Replies: 26
Views: 14532

Re: M16A Type 1 and Type gearbox

I see.. Yes, but i guess, changing to even bigger final will worsen the spin..If i can suggest.. Here's a speed calculator http://www.boosttown.com/gearbox_differential/speed_calculator.php I thought it can help u figure out the best final gear that suits you.. U can record the usual speed u use in ...
by ddamddimddem
Sat Jul 06, 2013 11:42 pm
Forum: New Swift Technical
Topic: M16A Type 1 and Type gearbox
Replies: 26
Views: 14532

Re: M16A Type 1 and Type gearbox

Neil, i'm getting confuse.. So which gearbox are u having? Have the latest final arrive?

Just curious, From what i know your ride is boosted.. But i change into bigger final? For what benefit?
by ddamddimddem
Sat Jul 06, 2013 11:28 pm
Forum: New Swift Technical
Topic: M16a internals
Replies: 1
Views: 1706

Re: M16a internals

No it did not
by ddamddimddem
Wed Jul 03, 2013 5:01 pm
Forum: In The Build
Topic: 381 WHP Suzuki Swift ZC21S Turbo 1600cc
Replies: 51
Views: 36775

Re: 381 WHP Suzuki Swift ZC21S Turbo 1600cc

3. Ogura racing clutch http://www.more-japan.com/orc-250light-series-clutch-zc31s-m16a-engine-std.html Capable of 246whp 1360usd 4. Dd racing twin clutch http://www.ebay.com.my/itm/DD-RACING-CLUTCH-SUZUKI-SWIFT-SPORT-M16A-1-6CC-2004-2010-TWIN-PLATE-/280985235700?pt=AU_Car_Parts_Accessories&hash=...
by ddamddimddem
Wed Jul 03, 2013 4:52 pm
Forum: In The Build
Topic: 381 WHP Suzuki Swift ZC21S Turbo 1600cc
Replies: 51
Views: 36775

Re: 381 WHP Suzuki Swift ZC21S Turbo 1600cc

Problem is the carbon clutch is verrrrry expensive.. And many suggest its not good for daily except u're a really neat and fully understand how to use the carbon clutch.. As the friction coefficient is very sensitif to heat.. Need to heat up.. Blablabla.. Also many of my friends broke it at drag rac...
by ddamddimddem
Wed Jul 03, 2013 4:12 pm
Forum: In The Build
Topic: 381 WHP Suzuki Swift ZC21S Turbo 1600cc
Replies: 51
Views: 36775

Re: 381 WHP Suzuki Swift ZC21S Turbo 1600cc

Finally found how to convert newton to kg, apparantly newton is mass times gravity lol Thanx lee for the input, already pm ed them, mean while i just gonna share some info 2. Ats across carbonetics http://www.ppi-ats.com/Carbon_clutches/CC_%20appli_Oct_%202010_Subaru&Suzuki.pdf http://www.nengun...
by ddamddimddem
Tue Jul 02, 2013 4:19 pm
Forum: In The Build
Topic: 381 WHP Suzuki Swift ZC21S Turbo 1600cc
Replies: 51
Views: 36775

Re: 381 WHP Suzuki Swift ZC21S Turbo 1600cc

After a long search i found a few replacement candidates 1. Exedy hypersingle vf for swift sport zc31s http://www.exedy-racing.com/racing/en/pro/hy_single_vf.html Its a hybrid with 2 combine surface, u can look at the web, combination of ceramic and organic, saying that this will increase drivabilit...
by ddamddimddem
Tue Jul 02, 2013 3:26 pm
Forum: In The Build
Topic: 381 WHP Suzuki Swift ZC21S Turbo 1600cc
Replies: 51
Views: 36775

Re: 381 WHP Suzuki Swift ZC21S Turbo 1600cc

Thanx d, Btw i have a new problem.. At heat 2 drag day, after changing into a more grip tire, i think the clutch also slipped.. After i engage to 2nd gear, the silicone hose detach, i experience very rich mixture, but everytime i shift it hit red line spontaneously like the wheel is spinning of no t...
by ddamddimddem
Wed Jun 26, 2013 10:32 am
Forum: In The Build
Topic: 381 WHP Suzuki Swift ZC21S Turbo 1600cc
Replies: 51
Views: 36775

Re: 381 WHP Suzuki Swift ZC21S Turbo 1600cc

@d Hehehe thank you d! It's always a pleasure to beat them hahaha.. Thanx for the info d! How about block guard? Are they useful? I didnt install one, as we tried to make custom block guard but the machining shop said the water jacket too small for blockguard.. @lee Hi lee! How are you? I lost your ...