It is currently Wed Nov 22, 2017 1:28 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 19 posts ] 
Author Message
 Post subject: Swift GTi mk3 reconstruction by plastek
PostPosted: Fri Oct 04, 2013 6:19 am 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
Hello all!

3 years ago i bought a swift gti mk3. Pretty bad condtition , 1.3 8v gearbox , all bumpers have cracks , fuel and brake fluid leaking itd. A lot of parts i must buy from USA or Australia becouse in Poland has no interesting parts to this model.

This swift has some parts like this : 48.6 bored MAF , sr20 trothle body , KN filter , FMIC cai , 2" exhaust with custom made muffler , Tom's Rally chip , power stering , USDM lights , Suzuki sport shift knoob , rear lip , MK2 front bumper , OMP corsica stering wheel , mk2 seats , 14" 7-spoke wheel , itr jdm 96" 15" wheel , koni sport , vogtland springs etc


Image

Image

alot of rust have been remove
Image

Image

some paint work

Image

Stock gearbox from 8v have a big crack . Diff fall out ;)

Image


new wheels , Lenso RT samurai super light 15x6.5J with 195\50 tyres and stock springs

Image


Last edited by plastek on Fri Oct 04, 2013 6:50 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Fri Oct 04, 2013 6:28 am 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
stock 4-2-1 headers and new lambda denso dox1200

Image


new paint work. D0 base color + Comp F03 white pearl

Image

Image


Image

Image

some photos under the hood. Bored 48.6mm MAF , SR20 throthe body , fmic cai , omp strut , KN filter

Image


m-tech custom back muffler . 2" IN. It's copy from oryginal muffler + some upgrades

Image


Attachments:
DSC08678.JPG
DSC08678.JPG [ 103.63 KiB | Viewed 275 times ]
DSC08570.JPG
DSC08570.JPG [ 126.24 KiB | Viewed 272 times ]
DSC00819.JPG
DSC00819.JPG [ 299.02 KiB | Viewed 286 times ]


Last edited by plastek on Thu Oct 10, 2013 7:35 am, edited 1 time in total.
Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Fri Oct 04, 2013 6:37 am 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
Swift after wash with 14inch wheels painted in new BWM white color

Image

Image

washing my old g13b , pretty , isn't ? :)

Image

new engine , 130'k , stock power , great condtition

Image

spy photo with integra . Swift have in those days integra jdm spec 96" wheel with 195\45 uniroyal rainsport tyres

Image

shoot from inside . Momo wheel , suzuki sport shift knoob

Image

my girlfriend complained to drive swift so I upgrade him to power stering from Cino

Image

old g13b , bye bye ;(

Image


engine bay has a new paint job

Image


new engine fit good , some details to plug in and we ready to go

Image

Image


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Fri Oct 04, 2013 6:40 am 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
new mk2 seats , in great condtion

Image

itr wheels , dark bronze color

Image


suzuki sport shift knoob , came straight from Japan

Image


New GENUINE parts from Suzuki. Brake pats ( tokico ) and disk from 95r ;) Brand new

Image

new wheels. Suzuki 7-spoke wheel with strange cover

Image

front down strut - wiechiers sport

Image

Image

some suzuki accesories

Image

White 14" 7-spoke wheel with black hood

Image

Image


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Sat Oct 05, 2013 1:37 pm 
Offline

Joined: Mon Aug 25, 2003 12:00 am
Posts: 336
Location: Central Coast
Great to see all the work you've put in has paid off - looks great!!


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Sat Oct 05, 2013 5:02 pm 
Offline

Joined: Mon Aug 25, 2003 12:00 am
Posts: 1526
Location: Londoninium
Gone through a few sets of wheels there sir!

I don't fancy any of that upside down welding in the cold and wet of Poland
Car does look good and worth the effort to date.
I too like the seats from that model.

GTP


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Thu Oct 10, 2013 7:44 am 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
some work to fit SR20 TB to intake

Image

winter wheels with 185/55 snow tyres

Image

my audio in trunk , ps300T , ps400m , rf p3 and Matters stress bar

Image


omp corisica wheel

Image


black hood , 7-spoke 14 inch wheel with polish lip and grey color . Tyres 175/60/14. USDM tail lights

Image


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Thu Oct 10, 2013 7:50 am 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
swift also has a Vogtland springs , full Koni sport , new brake disc and pads from Suzuki Genuine


Image

this is my race car but it's end in scrap jard. Has a full FOHA body kit


Image

my swift have many rust spots , so im trying to fix it !

Image

Image


Image


I want to do some changes in my car . Maybe tailights from new swift? With bumper from mk3 GTi

Image


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Thu Oct 10, 2013 7:17 pm 
Offline

Joined: Tue Mar 06, 2012 7:13 am
Posts: 38
Location: Netherlands
Great job! Also very nice that you have a complete foha mk3 gti bodykit. That stuff is rare. 8)


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Sat Oct 12, 2013 6:34 pm 
Offline

Joined: Thu Dec 20, 2007 4:48 am
Posts: 5
Location: Netherlands
Really inspiring to see all the work you put in it. Keep up the great work! =D>

Btw, for some reason a couple pictures (for instance of the racecar) are not resized. You might want to check that :)


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Wed Oct 16, 2013 5:33 am 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
first attempt to fit my new bodykit , some suzuki sport rare lip . Rear lip looks great but side plates do not fit good . Surely I put a front and rear lip


Image

Image


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Thu Oct 17, 2013 4:31 am 
Offline

Joined: Tue Mar 06, 2012 7:13 am
Posts: 38
Location: Netherlands
Why do the arch wideners not fit? They can be bend to fit correctly don't they? When the lips are mounted...the wideners should be too! :mrgreen: They belong together :P


Attachments:
IMG_3757.JPG
IMG_3757.JPG [ 1.73 MiB | Viewed 271 times ]
IMG_3690.JPG
IMG_3690.JPG [ 949.63 KiB | Viewed 274 times ]
Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Thu Oct 17, 2013 12:50 pm 
Offline

Joined: Mon Aug 25, 2003 12:00 am
Posts: 1526
Location: Londoninium
The arch extenders only fit on one corner. they have kleft and right for rear and left and right for front. Perhaps you ahve them backwards, inside out or upside down.
Or the arch is bent!
Are they original plastic or aftermarket fibreglass. if they are fibre thay may have distotred after moulding. (Common with glass fibre)

GTP


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Wed Sep 30, 2015 3:06 am 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
I come with my new mk2 swift all wheel drive :)

Image

Image

Image

Image

Image

At this time it goes to be... RWD :)


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Thu Oct 01, 2015 6:12 pm 
Offline
User avatar

Joined: Tue Jan 31, 2006 2:27 pm
Posts: 2370
Location: Gold Coast
That looks hot =D>


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Mon Oct 05, 2015 4:26 am 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
Image


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Fri Oct 09, 2015 5:28 pm 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
Making of AWD by my friend MichaƂ .


https://www.youtube.com/watch?v=-k6cIv1Ycx4


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Wed Nov 25, 2015 8:11 am 
Offline

Joined: Sun Jan 22, 2012 12:41 am
Posts: 19
Location: Poland
Some test on Swift RWD :) I waiting for snow and then put 4wd on welded wiscous


https://www.youtube.com/watch?v=wGce-7Rl9yo


Top
 Profile  
 
 Post subject: Re: Swift GTi mk3 reconstruction by plastek
PostPosted: Wed Nov 25, 2015 9:44 pm 
Offline

Joined: Tue Mar 06, 2012 7:13 am
Posts: 38
Location: Netherlands
Nice! Where is your old swift? And the foha bodykit?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group