It is currently Tue Nov 21, 2017 1:38 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 134 posts ]  Go to page 1, 2, 3, 4, 5 ... 7  Next
Author Message
 Post subject: IPRA Mk3 Swift
PostPosted: Wed Jan 19, 2011 8:35 am 
Offline
User avatar

Joined: Mon Aug 25, 2003 12:00 am
Posts: 1664
Location: Adelaide
Been in the build for 3 years now. Have too many photos to add and what has been done I have forgotten half of it.

Should have been doing it as I went, but couldn't be arsed.

SPECS

Engine
G13B Block
Mk1 crank offset ground
1mm OS Valves
SuziSport HD valve springs
Custom Head porting by Mace Performance & Race Engines
Tighe Cams 1044 Grind
RM Motosport Adjustable Cam gears
Honda 75mm D16 Pistons
Mk1 Rods
C/R 11.8:1
Mazda BP18 Injectors
Mk1 rail with Turbosmart Pressure Regulator
Nissan GTR throttle plates with Custom inlet manifold (Quad throttle)
MoTec M84 ECU (to come)
Modified distributor for Hall effect sensors with LS1 Quad coils
Oil cooler & remote filter
Built by Mace Performance & Race Engines
Tuned By Morpowa Dyno Centre
4-1 headers
straight through 2.25" exhaust with 1 magna flow box
Bosch 070 main pump

Body
Std Mk3 body kit
Walker Chassis CAMS 6 point weld in ROPS
IPRA compliant trim
Electrical - complete rewire (own specs)
Custom switch panel (Lights, wipers, start button, ECU etc.)
VELO Apex Std FIA Head restraint seat
Velo Ultralight 6pt HANS Harness
MoTec CDL3 Track Dash Logger
Custom 20L Aluminium fuel tank with external serge tank

Suspension
Front:
Std Strut modified with Koni insert revolved to suit spring rates and short stroked
450Lb Lovells Xtreme series coil over spring
Noltec camber/caster top mount plates
Camber bolts
DMWDave modified lower control Arms
30mm Kmac sway bar
Wilwood 4sport Calpiers
Harris Motorsport 2 piece Alloy Hats
Wilwood 277mm GT Rotors
Project Mu Club Racer Pads
Rear:
Koni shocks revolved to suit spring rates and short stroked.
800Lb custom spring in stock location
18mm Kmac sway bar
Standard GTi rear calipers
Project Mu NS400 Pads
Ride Height (taken from lip of guard to centre of wheel)
Rear = 300mm
Front = 310mm


Wheels & Tyres
Speedy Lite9 in 15 x 7 in a p40 offset.
Tyres are Yokohama AO50(category tyre) 195 50 15.
Front has a 16mm spacer.
Rear has a 5mm spacer

Attachment:
car.jpg
car.jpg [ 123.63 KiB | Viewed 317 times ]

Attachment:
car1.jpg
car1.jpg [ 105.52 KiB | Viewed 313 times ]

Attachment:
car2.jpg
car2.jpg [ 126.81 KiB | Viewed 311 times ]

_________________
IPRA MK3 Gti ~ Mallala 19/11/11 1:23.5915
Sponsored by
Autosport ~ Velo Seats ~ Morpowa Dyno Centre ~ Diamond Concrete Finishers & Polishers


Last edited by moylee19 on Mon May 30, 2011 1:06 pm, edited 3 times in total.

Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Wed Jan 19, 2011 10:45 am 
Offline
User avatar

Joined: Sat Feb 05, 2005 6:51 pm
Posts: 1763
Location: Chch - Quake Capital
Looking good, your wiper is just like mine 8)


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Wed Jan 19, 2011 10:50 am 
Offline
User avatar

Joined: Sun May 21, 2006 10:04 pm
Posts: 945
Location: Prestons
very nice 8) any engine bay pic's ?

_________________
Live fast Drive faster


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Wed Jan 19, 2011 11:52 am 
Offline
User avatar

Joined: Mon Aug 25, 2003 12:00 am
Posts: 1664
Location: Adelaide
Dattman wrote:
Looking good, your wiper is just like mine 8)


That will be changed back to standard as we have to run wipers in standard location and both of them.

GTi Kid wrote:
very nice 8) any engine bay pic's ?


Will work on some tonight.

Thanks.

_________________
IPRA MK3 Gti ~ Mallala 19/11/11 1:23.5915
Sponsored by
Autosport ~ Velo Seats ~ Morpowa Dyno Centre ~ Diamond Concrete Finishers & Polishers


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Wed Jan 19, 2011 12:23 pm 
Offline
User avatar

Joined: Tue Dec 11, 2007 6:43 pm
Posts: 234
Location: Newcastle
What are the specs, that you can remember...

_________________
Past GTi Glory
White 91' Mk2 AAR53Y
Red 93' Mk3 XBE273


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Wed Jan 19, 2011 8:57 pm 
Offline
User avatar

Joined: Thu Jun 09, 2005 11:16 pm
Posts: 3228
Location: Perth WA
Perhaps a few display pics of the RM logo parts youve been sitting on all this time :lol:
Im pleased to hear this long build will be driven in anger soon, cant wait


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Wed Jan 19, 2011 9:42 pm 
Offline
User avatar

Joined: Fri Nov 19, 2010 7:59 pm
Posts: 230
Location: Barbados
What's the size of the wheels and tires and how much is it lowered?

_________________
BajanBomb!


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 20, 2011 12:14 am 
Offline
User avatar

Joined: Sun Feb 14, 2010 10:23 pm
Posts: 1999
Location: taree
Looks good mate.remember any specs?

_________________
BWTCHD performance
swiftless


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 20, 2011 6:47 am 
Offline
User avatar

Joined: Mon Aug 25, 2003 12:00 am
Posts: 1664
Location: Adelaide
Will sit down next week and put up the specs and some details of the car. In a mad rush ATM to make the first practice day on Saturday. [-o<

_________________
IPRA MK3 Gti ~ Mallala 19/11/11 1:23.5915
Sponsored by
Autosport ~ Velo Seats ~ Morpowa Dyno Centre ~ Diamond Concrete Finishers & Polishers


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 20, 2011 7:45 am 
Offline
User avatar

Joined: Sun Feb 14, 2010 10:23 pm
Posts: 1999
Location: taree
Good luck for saturday

_________________
BWTCHD performance
swiftless


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 20, 2011 7:55 am 
Offline

Joined: Mon Jan 18, 2010 6:58 am
Posts: 120
Location: Brisbane
Go Simon Go!

Love to see and hear it in action.


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 20, 2011 8:20 am 
Offline
User avatar

Joined: Mon Aug 25, 2003 12:00 am
Posts: 4479
Location: Brisbane
Lee wrote:
Go Simon Go!

Love to see and hear it in action.


" action " ?

didnt simon mention this is a show and shine car. 3J look-a-like. there is a hamster in a wheel in the engine bay. A bit like your banana car and my mk1. Except mine dosent look like a show car.

_________________

2008: Mk1 TAR car, stock engine, open diff - 1/4mile 14.774 @ 91mph

2006: Mk1- yeah well at some stage to go on track...
2003-2005 Mk3(retired)- EC 1:54.6 , Wakefield 1:13.14 , OP (short) 52.00 , OP GP 1:24.40


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 20, 2011 9:25 am 
Offline
User avatar

Joined: Mon Aug 25, 2003 12:00 am
Posts: 1664
Location: Adelaide
tekkie wrote:
[didnt simon mention this is a show and shine car. 3J look-a-like.


:-# Shh. Don't give away my secret, was just going to fudge times to make you all think I have finshed the car.

I am pretty good at photoshop don't you think :lol:

_________________
IPRA MK3 Gti ~ Mallala 19/11/11 1:23.5915
Sponsored by
Autosport ~ Velo Seats ~ Morpowa Dyno Centre ~ Diamond Concrete Finishers & Polishers


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 20, 2011 1:42 pm 
Offline
User avatar

Joined: Mon Aug 25, 2003 12:00 am
Posts: 6838
Location: Brisbane
Looks good mate

_________________
Issue 42 http://www.ssgti.net/fastb.htm

YOU want to PLAY, YOU got to PAY .. Performance doesn't come cheap


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 20, 2011 4:23 pm 
Offline
User avatar

Joined: Tue Jul 14, 2009 9:27 am
Posts: 684
Location: Melbourne
good luck for saturday man, looking foward to reading some specs and seeing the engine bay!!

_________________
92 gti, ''the money pit'' 15,120k and increasing....
CJ peformance ecu, cultus cams, moylee19 gears and a nut behind the wheel :lol:


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 27, 2011 7:56 am 
Offline
User avatar

Joined: Mon Aug 25, 2003 12:00 am
Posts: 1664
Location: Adelaide
DeTune wrote:
What's the size of the wheels and tires and how much is it lowered?


Wheels are Speedy Lite9 in 15 x 7 in a p40 offset.
Tyres are Yokohama AO48 (category tyre) 195 50 15.
as for ride height, from the centre of the rim to the lip of the guard
Rear = 300mm
Front = 310mm

Front and Rear has an 8mm spacer.

More details to follow when I get a chance at home.

_________________
IPRA MK3 Gti ~ Mallala 19/11/11 1:23.5915
Sponsored by
Autosport ~ Velo Seats ~ Morpowa Dyno Centre ~ Diamond Concrete Finishers & Polishers


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 27, 2011 1:43 pm 
Offline

Joined: Mon Jan 18, 2010 6:58 am
Posts: 120
Location: Brisbane
moylee19 wrote:
I am pretty good at photoshop don't you think :lol:





Pfft....probably isn't even his car......


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Thu Jan 27, 2011 3:12 pm 
Offline
User avatar

Joined: Mon Aug 25, 2003 12:00 am
Posts: 1664
Location: Adelaide
Lee wrote:

Pfft....probably isn't even his car......


Spot on Lee, like most things of mine, the wife will claim she owns it.

_________________
IPRA MK3 Gti ~ Mallala 19/11/11 1:23.5915
Sponsored by
Autosport ~ Velo Seats ~ Morpowa Dyno Centre ~ Diamond Concrete Finishers & Polishers


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift
PostPosted: Fri Jan 28, 2011 7:19 am 
Offline

Joined: Mon Aug 25, 2003 12:00 am
Posts: 1149
Location: Adelaide
I think on this occassion the wife will be happy to dis-own the car.

Hurry up with the specs Simon, people are waiting! 8)

_________________
Mallala:
1:28.27 (27MAR11) Black MK3 IPRA GTi


Top
 Profile  
 
 Post subject: Re: IPRA Mk3 Swift ~ Updated with Specs
PostPosted: Fri Jan 28, 2011 5:26 pm 
Offline
User avatar

Joined: Mon Aug 25, 2003 12:00 am
Posts: 6712
Location: Camden
What about you Dean? How is yours going, seems as though you have been locked in the shed for a few months! :lol:

_________________
Swift gone.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 134 posts ]  Go to page 1, 2, 3, 4, 5 ... 7  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group